You are here:

VH HEAD Digital Microscope

VH Head Specification

  • VH series viewing heads combine monitor and camera into a single device that attaches directly to your compound microscope for live on-screen viewing.
  • 7” IPS screen displays images and videos at crisp 1080p resolution.
  • Built-in software supports image adjustments such as Hue, Saturation, and Brightness, along with Calibration and Measurement tools.
  • Replaces a compound microscope’s monocular, trinocular, or binocular viewing head. Compatible with SKC, CXL, 77, and IR series microscopes.
  • Compact and lightweight design for easy transport and storage.
Availability: In Stock
  • Ships in 3-5 business days
  • 1-year warranty on optics and body
  • Installation guide by phone or video
  • Spares stocked for 10 years

1000x

Maximum total magnification

1.25 N.A.

ABBE double-lens condenser

50,000 h

Rated LED lamp life

90–240 V

SMPS, handles Indian supply swings

Sensor Specifications
Sensor Optical Format 1/2.8″
Active Pixels 2M
Pixel Size 2.9µm x 2.9µm
Active Sensor Area 5.57mm x 3.13mm
Other Camera Specifications
Video Resolution 1920 x 1080
Video Framerate 30fps
Video Capture Supported
Photo Capture Button snap / timed snap
Image Adjustment Parameters Saturation / Hue / Brightness / Contrast / Monochrome / Flip vertical / Flip horizontal / FOV
Calibration and Measurement Supported
Microscope Mount 42.5 / 42 / 44 mm
Power 5VDC 1A
Monitor Specifications
Screen Size 7″ (diagonal)
Panel Type IPS
Storage SD Card
Dimensions 182mm x 125mm x 85mm

Contents
• One screen with a built-in camera
• One SD to USB adapter
• One 4GB SD card
• 5V/1A power adapter

Before you order

Questions buyers actually
ask

1000×. The WF10X eyepieces multiply with the 100X oil immersion objective, giving 40×, 100×, 400× and 1000× across the four positions on the nosepiece. Beyond 1000× you gain no additional detail with this optical system — you are only enlarging an image the numerical aperture has already limited.

You need it for the 100X objective. Without oil filling the gap between the coverslip and the front lens, light bends away at the glass–air boundary and the effective N.A. drops well below 1.25 — the image goes dim and soft. A vial is included in the box. Wipe the objective with lens tissue after each session.

Semi-plan objectives give a flat, sharp image across roughly 80% of the field, with slight softening at the extreme edge. Plan objectives correct the full field but cost significantly more. For routine screening and teaching, semi-plan is the practical choice; for photomicrography where edge-to-edge sharpness is published, ask us about the plan upgrade.

LED for almost every lab. It runs at 50,000 hours against roughly 1,000 for halogen, stays cool so it does not dry your specimen, and holds colour temperature as you dim it. Halogen remains available if your protocol was validated on it or you need its warmer spectrum for particular stains.

Yes. The sliding binocular head accepts our XCAM Mini and X Cam C-mount cameras through an adapter. If documentation is a daily requirement rather than an occasional one, consider a trinocular model instead so you keep both eyepieces and the camera port live at the same time.

Stock units dispatch in 3–5 business days. We ship across India by surface and air freight, and export with wooden crating on request. Institutional and tender orders with specific documentation requirements are handled by our sales desk — call +91 8727015757.

The unit carries a one-year warranty on body, optics and electricals. We stock spares — objectives, eyepieces, LED assemblies, stage parts — for ten years from the date of manufacture. Most issues are resolved over a video call; parts ship direct to your lab.

Pricing depends on configuration (LED or halogen, objective set, camera adapter) and order quantity, so we quote per enquiry rather than list a single figure. Send your requirement through the form below or on WhatsApp and you will have a written quotation with GST and freight the same working day.

You may also like